• Traffic Light Signal Eyebolt Display Hanger


    This is a new hanger assembly for any traffic signal.  May be used with 3-light signals, pedestrian cross walk signals, or single body 4-way signals with a standard 2 inch hole.  Assembly consists of the following items: 
    • (1) 3/8" x 4" eyelet (rated for maximum 150 lbs.)
    • (1) 3/8" nut
    • (1) 3/8" self locking nut
    • (2) 3/8" x 2-1/2" washers(6) 3/8" x 1" washers 


    Simply insert the eyelet with washers into your traffic light hole.  Use the 3/8" x 1" washers for spacers to represent the thickness of your light.  Assemble as shown in picture.  Screw the self locking nut on leaving approximately 1/4" thread exposed and tighten down the top exterior nut.  Adjust the spacers as necessary so that the unit fits snugly.  Some light housings may require additional spacers depending on thickness.